波紋填料
Corrugated filler

一、產品介紹（Product introduction）
波紋填料主要是取代塔內散堆填料，解決阻力大、比表麵積小，傳質效能差、易破碎等突出問題。它規定了氣液流路．改善了淘流、壁流和潤濕性能．降低了阻力，同時提供更多的氣液接觸麵積從而提高了傳質，傳熱效果。
It is mainly to replace the bulk packing in the tower, and solve the outstanding problems such as large resistance, small specific surface area, poor mass transfer efficiency, and easy to break. It regulates the flow path of gas and liquid. Improved arsion, wall flow and wetting performance. Reduced resistance while providing more gas-liquid contact area thus improving mass and heat transfer.
比表麵積大、孔隙率高、重量輕，填料效率高；氣相通路傾角小，有規則的氣相通路，壓力損失小，填料壓降低；徑向擴散良好汽液接觸充分。
Large specific surface area, high porosity, light weight, high packing efficiency; The inclination angle of the gas phase path is small, there is a regular gas phase path, the pressure loss is small, and the packing pressure is reduced; Radial diffusion is good for vapor-liquid contact sufficient.

二、產品用途（Product Usage）
波紋填料一般用於同位素分離或需要大量理論板數的難分離物係的精密分餾，也可用於高度愛到嚴格限製或要求達到高純度產品的場合。
It is generally used for precision fractionation of isotope separation or difficult to separate material systems that require a large number of theoretical plates, and can also be used in situations where highly loved to strictly limit or require high purity products.
波紋填料應用於石油化工、如煉油廠催化裂化提餾段、化肥、天然氣、生物化工、環境工程等廣大領域。
Applied in petrochemical industry, such as refinery catalytic cracking distillation section, fertilizer, natural gas, biochemical, environmental engineering and other fields.

三、適用範圍（Scope of application）
波紋填料可廣泛用於煤氣洗滌塔．焦化洗滌，洗苯、洗氨培、化肥熱氣飽和、脫硫酸、硫酸幹燥、吸收塔等。
Can be widely used in gas scrubbers. Coking washing, benzene washing, ammonia washing, fertilizer heat saturation, desulfurization, sulfuric acid drying, absorption tower, etc.
填料在塔呐構成均勻的幾何圖形排列,規定了汽液流路,改善了溝流及壁流現象.由於絲網獨具的毛細作用，又使表麵積有更為有效的潤濕性能，有低的壓降和少的持液量,因此具有很高的分離效率。特別適用於難分離物係及熱敏性物係。The packing materials form a uniform geometric arrangement in Tano, which specifies the flow path of vapor and liquid, and improves the phenomenon of ditch flow and wall flow. Due to the unique capillary effect of the screen, the surface area has a more effective wetting performance, with low pressure drop and less liquid holding capacity, so it has a high separation efficiency. It is particularly suitable for refractory and heat-sensitive systems.

四、技術指標（Technical specifications）

填料型號峰高mm 比表麵積m2/m3 空隙率m3/m3 壓力降mmhg/m 理論板數m-1 堆積密度kg/m3
SW-1 4.5 651 0.976 2-3.5×10-4 6~8 165
SW-2 6.5 454 0.986 1.6-1.8×10-4 4~5 110
填料型號比表麵積m2/m3 水力直徑mm 空隙率m3/m3 壓力降mmhg/m 理論板數m-1 堆積密度kg/m3
SW-1 643 5.7 0.916 2-2.3 6~8 139
SW-2 450 9 0.955 1.6-1.8 4~5

上一篇：關於選擇18禁午夜黄瓜自慰久久久海爾環的知識
下一篇：槽式液體分布器

電話：135-0799-5683 電話：4008-393-899 地址：江西省萍鄉市上栗縣彭高工業園

贛ICP備2023002645號-1

午夜亚洲理论视频,午夜福利视频合集,成人午夜视频播放,18禁午夜黄瓜自慰久久久

波紋填料